Page 10 of Industrial News about Valve Industry

The forged steel gate valve is suitable for small diameter pipelines with the class betweem 150 lb to 2500 lb, the working temperature between - 29 ℃ to 425 ℃ (for carbon steel) or between - 29 ℃ and 500 ℃ (for stainless steel). It is used to cut off or connect the medium in the pipelines. And...

The opening and closing part of gate valves is the gate plate. The movement direction of gate valves is perpendicular to the flow direction. Gate valves can only be fully opened and fully closed and can not be adjusted and throttled. There are two sealing surfaces in gate valves. The wedge angle of...

How to make the performance of stainless steel flange ball valves stable? The stainless steel flange ball valve is a kind of universal stainless steel valve, it is widely used in the valve application. Therefore, reasonable maintenance can improve the work efficiency, reduce the maintenance time and...

The purpose of the check valve is to prevent the reverse flow of the medium. Generally, the check valve should be installed at the outlet of the pump. In addition, a check valve should be installed at the outlet of the compressor. In short, in order to prevent reverse flow of medium, the check...

This article will take you to understand wafer butterfly valves from a professional point of view. Valves belong to one kind of large-scale manufacturing industry. As a main category of valves, its scale can not be underestimated. We all know that in today's technological development and innovation,...

Clip-on butterfly valve, also named as wafer butterfly valve is one of the most common valve types in industrial pipeline. Its structure is relatively small. It is only necessary to put the butterfly valve in the middle of the flange at both ends of the pipeline, and use the stud bolt to lock the pipe...

In the end, we should have a general understanding. In order to be able to make specific analysis, we will give examples to illustrate it. Ball valve is generally divided into floating ball valve and fixed ball valve. The model of floating ball valve can be written as Q41F ( Q is the initial word...

The specification and model of stainless steel ball valve | representation method of stainless steel ball valve model | the compilation and expression of stainless steel ball valve model is mainly divided into seven important elements: valve type, driving mode, connection type, structural...

Thousands of Boeing 737 are under emergency inspection due to valve problems. Because it may cause engine failure. The Federal Aviation Administration (FAA) last week gave orders about an emergency inspection of about 2000 Boeing 737 aircrafts because of potential engine valve problems. Because it could...

We need to know that the globe valve can not be used in any pipeline. This article will talk about the knowledge of globe valve. The opening and closing parts of globe valve are plug-shaped disc. The sealing surface is flat or conical. The disc moves in a straight line along the center line of the valve...